We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.
Menu
Your Cart
Free mainland delivery £200+ · Highlands, islands & NI £9.99
Plan your space

Quick BTU calculator

Enter your room measurements for an estimated heating requirement. Compare radiators without leaving this page.

Starting assumptions: two adjacent outside walls, 1.5m² low-E glazing, insulated cavity walls, ground floor and insulated loft. Check these against your room.

Check or change room assumptions

U-values describe heat passing through a surface; use known building values where available. −3°C outdoors, 10°C below and the default U-values are preliminary assumptions, not a location survey. Unheated lofts use the outdoor temperature; heated floors/ceilings use U 1.36/1.62 and the adjacent-room temperature.

Preliminary rectangular-room estimate, not an installer’s heat-loss survey. It excludes detailed thermal bridging, ground/loft modelling and ventilation-system design. Confirm the room heat loss and radiator output at your heating-system temperatures before ordering.

Need help choosing? Contact us →

Blog - Central heating

RSS Feed

11 Nov Why Is My Towel Radiator Not Heating Up?

Why Is My Towel Radiator Not Heating Up?

A towel radiator that is warm at the bottom but cold at the top may have trapped air. A rail that stays cold at the bottom or is cold all over needs a different check. Start by comparing it with the other radiators while the central heating is running. If you see an active leak, switch the affected heating off and deal with the leak first. Start wi..
11 Nov Towel Radiator Cold at the Top? What to Check Before Bleeding

Towel Radiator Cold at the Top? What to Check Before Bleeding

If the lower bars of a central heating towel radiator warm up but the top stays cold, trapped air is a likely explanation. Check whether it is a water-fed rail and whether that pattern persists after the heating has had time to warm up. When bleeding is a reasonable first step Use the instructions for your radiator and heating system. Switch the he..
11 Nov Towel Radiator Cold at the Bottom? Sludge and Circulation Checks

Towel Radiator Cold at the Bottom? Sludge and Circulation Checks

A slightly cooler return end can be normal. A distinct band of lower bars that stays cold while the top is hot after warm-up can point to restricted circulation, sometimes from debris or sludge. The heat pattern alone cannot show where a restriction is or what treatment the system needs. Compare like with like Check the rail during a normal heating..
11 Nov Only One Towel Radiator Is Cold While the Others Heat Up

Only One Towel Radiator Is Cold While the Others Heat Up

When the rest of the radiators are heating but one towel rail stays cold from top to bottom, start with the rail’s normal controls. Confirm it is connected to the circuit currently running and that its user-operated valve is set to allow heat. Check the controls and timing A thermostatic radiator valve (TRV) responds to the air around it. If the ba..
11 Nov Towel Radiator Leaking? How to Identify the Source

Towel Radiator Leaking? How to Identify the Source

If you can see water dripping from a towel radiator, switch off the affected heating and let the rail cool. Keep people away from hot water and protect the floor if you can do so safely. If water is near an electrical connection, avoid touching the rail, its controls or the wet area. Get urgent professional help if water is spreading or near electr..
11 Nov Repair or Replace a Towel Radiator? What to Check First

Repair or Replace a Towel Radiator? What to Check First

A towel radiator may be worth repairing if the fault is at a replaceable valve or joint and the body is sound. If water is coming from the body, corrosion is worsening or failures keep recurring, ask an engineer to assess replacement and check the condition of the heating system. Compare the whole job Ask the installer to identify the failed part a..
Showing 1 to 6 of 6 (1 Pages)
WhatsApp us