
250mm Wide 600mm High Flat Chrome Towel Radiator
- Size
- 250 × 600mm (W × H)
- Pipe centres
- 200mm
- Finish
- Chrome
- Listed output
- 553 BTU/h · 162 W
Available to order
£44.99Inc. VATRadiator only · valves extra
View sizes & options
Part of our 250mm narrow towel radiator buying guide. Use this page to check the installed footprint before selecting a height or finish.
A 250mm towel rail needs room for its body, the selected valves, the towel and practical access to the controls, rather than a bare 250mm strip of wall. Fittings extending 30–50mm on each side would give an illustrative 310–350mm footprint, but the complete valve drawing must determine the actual allowance.
Measure between the finished obstructions, not the room’s unfinished plaster or a dimension on a general floor plan. A door architrave, vanity overhang or shower-screen handle can use the same space as a valve even when the radiator outline itself fits neatly.
Browse 250mm chrome towel radiators and 250mm matt black towel radiators; compare current heights, finishes and availability on the category pages. For fittings, see radiator valves and compatible accessories and pipe covers.
The 250mm ladder rails linked here use 200mm between the centres of the two bottom radiator connections, which is different from their overall body width. Measure the existing pipe routes independently and include the chosen valve unions, because matching the radiator centres does not prove the complete installation can reuse the pipes unchanged.
Measure from centre to centre, keeping the tape level. Ask the installer whether floor pipes align beneath the tappings or whether a wall-fed arrangement needs an elbow or another offset; the assembled valve dimensions, not the radiator-only drawing, settle that decision.
A 200mm-wide rail in the related range has 150mm centres, so moving up to a 250mm body changes both measurements. The 200mm-versus-250mm comparison explains the trade-off before you commit to moving pipework.
The relevant valve dimension is its furthest installed projection towards a door frame, wall return or walkway, including the head and its operating space. Straight, angled and corner designs can place the control differently, so compare their drawings in the actual orientation instead of assuming one valve type always gives the smallest footprint.
As an example only, a 250mm body plus two 35mm side projections occupies 320mm before additional service access. If either valve is wider, or the control needs more hand clearance, use those measurements instead; 310–350mm should never be treated as a universal fitting tolerance.
A suitable corner arrangement may tuck a control closer to the wall than a particular angled alternative. Check compatibility with the selected radiator valves, and ask about suitable reducers if the existing pipework is 8mm or 10mm microbore.
The linked 250mm chrome rails use a 75–95mm wall-to-pipe-centre dimension and 90–110mm overall projection, depending on the approved bracket setting and the finished wall. The business has confirmed the same mounting dimensions for the 1600mm and 1800mm models, so add the selected valve and towel clearance when assessing a restricted walkway.
A hanging towel can project farther than the empty radiator and may swing or bunch near a drawer front. Make a simple side-view template with card, test the maximum listed projection and add the folded towel; do not set brackets beyond their approved adjustment to gain clearance.
For the dimension diagram and model links, return to the 250mm body, connection-centre and projection breakdown.
A radiator position is workable only when doors, drawers and shower screens can move normally with the rail, valves and towels installed, rather than just when everything is closed. Include skirting-board thickness, pipe boxing and vanity overhangs in the clearance check, and allow enough space to reach the valve without forcing a hand behind furniture.
Avoid relying on a door stop as the only protection for the installation without discussing its position and everyday use with the installer. The room should remain usable for all household members, including anyone who needs more turning or reaching space.
The chosen wall position must also line up with a suitable support and bracket arrangement for the radiator filled with water and carrying towels. On stud or plasterboard construction, confirm whether studs, timber noggins or appropriately assessed cavity fixings are needed before deciding that the most convenient empty wall strip is suitable.
Keep proposed holes clear of concealed cables and pipes. The supplied wall brackets do not make ordinary plugs suitable for every surface, and a rail should not double as a grab rail; use the narrow towel rail wall-fixing guide to plan the structural questions.
If electric or dual-fuel heating is being considered, have a registered electrician assess the bathroom location and equipment before fixing the position. The conversion checklist separates element compatibility from the radiator’s physical fit.
Once the installed width and projection fit the room, choose a height by checking comfortable towel reach and the output needed at the intended heating temperatures. A taller 250mm rail uses the same nominal body width but does not remove clearance, structural or electrical requirements, and a hand towel fitting neatly does not prove room-heating adequacy.
Use the BTU calculator and room-heating guide before treating the rail as the only heater. Compare current 250mm chrome and 250mm matt black examples, then return to the complete 250mm buying checklist before ordering.
Huseyin Aras is a bathroom heating and product sourcing specialist with more than 18 years of hands-on experience advising on radiator selection and fitting questions. This clearance guide uses the linked Cheap Radiator catalogue measurements as planning references, while the installer and selected manufacturer’s drawings determine the requirements for the particular finished bathroom.
Compare live 250mm-wide chrome examples in 600, 800 and 1000mm heights. Check the current options, exact output and full installation requirements before ordering.

Available to order
£44.99Inc. VATRadiator only · valves extra
View sizes & options
Available to order
£59.99Inc. VATRadiator only · valves extra
View sizes & options
Available to order
£69.99Inc. VATRadiator only · valves extra
View sizes & optionsPrices and availability come from the current catalogue. Examples may differ in height and output. Check the exact model’s full specification, rating conditions and installation suitability before choosing.